?>
شیشه بالکن      -      +      سانا رسانه      -      +      بیسیم موتورولا      طلایاب      +      دانلود تراست والت      -      *      +      -      قیمت خرید بیسیم      -      -      بلوک سبک      -      آموزش تعمیرات موبایل      +      -      *      استخر پیش ساخته      ردیاب موتور      *      صرافی تتر      بروکر فارکس      +      خرید کتاب تاپ ناچ      +      *      تحلیل اتریوم      -      فیلم هندی      *      -      -      .      +      -      +      -      /      حواله وسترن یونیون      خرید ماینر      -      دکتر زنان مشهد      خرید لایسنس نود 32      کسب درآمد      خرید رپورتاژ      فروش آنتی ویروس      سیگنال فارکس      لایسنس رایگان نود 32      یوزر پسورد نود 32      سئو سایت      لایسنس نود32      آپدیت نود 32      بهترین بک لینک     
High Barrier Films For Sale

High Barrier Films For Sale
 
نويسندگان
لینک دوستان
پنل کاربری
نام کاربری :
پسورد :
عضویت
نام کاربری :
پسورد :
تکرار پسورد:
ایمیل :
نام اصلی :
چت باکس
آمار
امروز : 3
دیروز : 5
افراد آنلاین : 1
همه : 2973

Following the floods, plastic carry bags under the thickness of 50 microns and size under 8x12 inches were banned by the state government under the Maharashtra Non-biodegradable Garbage Control (MNBGC) Act. Authorities there should take action against the manufacturers to stop the supply,” said a senior civic official.Civic officials have claimed that the sneaky supply of banned plastic carry bags from neighbouring states has resulted in the ban being not effective.According to the civic data, the Brihanmumbai Municipal Corporation (BMC) in the last four years has registered 3,789 cases and levied a fine of about Rs 1.Mumbai: Despite a ban on plastic carry bags, their illegal use is rampant in the city due to their free availability and underhanded supply from neighbouring cities. The clogging of drains due to plastic carry bags was one of the prime reasons for the 26/7 deluge in 2005, in which the entire city came to a standstill and over a thousand people lost their lives. The following offences will be liable for the punishment of Rs 25,000 fine and imprisonment of three months.The violation of this act would invite a penalty of Rs 5000 and Rs 10,000 for wholesale Heat Shrink SLEEVE film the first and second offence.Mumbai generates 7,200 metric tonnes of garbage daily, a significant portion of which is plastic. “Despite the ban, carry bags continue to reach hawkers from neighbouring cities like Diu, Daman, Silvassa, Vasai and Dahanu.


ادامه مطلب
امتیاز:
 
بازدید:
[ ۹ ارديبهشت ۱۴۰۰ ] [ ۱۰:۴۴:۱۶ ] [ mposgenei ]

The study was conducted in most of the major cities of the country, including Mumbai, Delhi, Bengaluru, Kolkata, Hyderabad, Chennai, Ahmedabad and Pune. From our study, we clearly understood that while the people are aware of the adverse effects of plastic, the uغير مجاز مي باشدe of this environmental poison is high, primarily due to lack of availability of proper alternatives," Managing Director and CEO of Velocity MR Jasal Shah said.A majority of people are aware of the harmful effects of plastic on environment, but still use it due to lack of availability of cheaper alternatives, a study said."It has been observed that even with plastic ban in 25 states of India, 15,000 tonnes of plastic is still procured from cities on a daily basis.The major difficulties faced by the respondents include shopkeepers not providing bags for carrying items, inconvenience caused due to carrying bags from home while shopping, alternatives not easily available and extra غير مجاز مي باشدt for carry bags, it said.The study also revealed that seven out of 10 respondents believe that the ban is only on the use of plastic carry bags and not on other variants of plastic like pouches, garbage bags and containers.With a sample size of 3,600, the national study conducted by market research and analysis company Velocity MR found that 90 per cent of respondents are aware of the harmful effects of plastic and 85 per cent of the respondents are even aware of the ban on polythene bags.This year, India has pledged to ban PETG shrink film Manufacturers all single-use plastics by 2022 and also plans to introduce a campaign against marine litter


ادامه مطلب
امتیاز:
 
بازدید:
[ ۲۶ فروردين ۱۴۰۰ ] [ ۱۰:۲۳:۰۳ ] [ mposgenei ]

The Maharashtra government wants to make the plastic ban in the state more stringent by cancelling shop licences if such material is found there, state Environment Minister Ramdas Kadam said Tuesday. He said that a primary level meeting had already been held to decide on how to go about implementing this new proposal.“We have succeeded up to 60 per cent in imposing plastic ban across the state. Now we want to make it more stringent by cancelling the license of shops if they are found in possession of banned plastic material,” Mr Kadam said.“A primary level meeting has already been held in Mumbai regarding cancellation of licence. We will take appropriate action next week on how it is going to be implemented,” the minister informed.

He said that visible littering of plastic bags had come down since the ban, adding that 290 tonnes of banned plastic had been seized and fines of `2.53 crore collected in this period.The minister said that the Union government was also impressed by the success achieved by the state in banning plastic and had sent a team to Mumbai to explore possibility of carrying out this ban on a wider scale.“We have shared information with these (Central) officials. They were impressed with the manner in which Maharashtra implemented the ban. A detailed presentation was made for them regarding our policy,” Mr Kadam said. He added that High Temperature Cooking Films Manufacturers there was “little possibility” of extension of time for concession given for the use of some types of plastic which the state plans to ban in a phased manner.Mr Kadam said that 12 regional offices of the government had carried out raids to ensure effective implementation of the plastic ban.Shiv Sena leader Aaditya Thackeray met Kadam Tuesday and the latter briefed him on the ban’s impact.


ادامه مطلب
امتیاز:
 
بازدید:
[ ۵ فروردين ۱۴۰۰ ] [ ۰۹:۴۶:۴۲ ] [ mposgenei ]

We are ready to cooperate but everybody should contribute,” Mr Bheda said. Explaining the views of the AIPMA, Mr Bheda said, “A ban would affect the poor and middle class because plastic is cheap and very useful. SEALUP-E2 Sealing Cover Film Suppliers Tags: gudi padwa, ramdas kadam, hiten bheda, plastic manufacturers. Violators will be imposed with fines ranging from Rs 5,000 to five lakh and/ or imprisonment of up to three months.

It is extremely difficult to pack eatables in paper bags. AIPMA has already brought up its differences with the government.”The plastic ban will be imposed across the state from Gudi Padwa (Sunday). Stating that the ban would lead to corruption because a provision of three months’ imprisonment has been made along with a hefty fine, Mr Bheda told The Asian Age, “Plastic manufacturers are ready to cooperate with the government to curb pollution, but we have to find out practical ways and solutions.

In the first phase Thermocol, plastic plates, glasses, spoons and bags have been banned.”“The ban in Karnataka and other places could not be implemented because there were genuine issues.

We can’t simply copy the US’ system. What will hoteliers, coconut water or juice centre vendors and shop owners use to parcel food items? The paper industry also causes pollution and more trees will be cut if the use of paper increases. We have to offer a cheaper alternative.Mumbai: In the wake of environment minister Ramdas Kadam announcement of a statewide plastic ban, the president of All India Plastic Manufacturers’ Association (AIPMA), Hiten Bheda, said that such a move would affect the common man, and paper bags are ‘more harmful to the environment’. Nevertheless, the government has gone ahead with the move, prompting the association to call a meeting to decide the future course of action next week, said Mr Bheda


ادامه مطلب
امتیاز:
 
بازدید:
[ ۳ فروردين ۱۴۰۰ ] [ ۰۴:۲۷:۳۲ ] [ mposgenei ]

It has resulted in massive import of finished goods from FTA countries into India at zero or concessional duty badly affecting competitiveness of Indian plastics processing industry. If increased, it would have adverse effect on automotive, healthcare segments and would lead to غير مجاز مي باشدt increases in the value chain. Industry demanded government to immediately roll back the increase of insurance premium as this is detrimental to the efforts to help the MSMEs for increasing their market share and increase their contribution in the GDP. It was further demanded that the custom duty on SAN and ABS should be brought to 5% to nurture associated industries growth,” he said. The Meet was attended by more than 70 participants representing 31 industry associations from across the country; industry leaders and other key stakeholders. It also demanded that The Directorate General of Trade Remedies should recommended anti-dumping duty on plastics finished goods originating in or imported from 3 major dumpers including China for a period of at least five years. Custom duty of Polypropylene and Polyethylene should be retained at 7. Jagat Killawala, President of The All India Plastics Manufacturers Association said that the Plastic Industry is one of the major contributors to the Indian economy and is expected to play a key role in India becoming US 5 Trillion Economy. It is a major contributor to the Indian economy manufacturing goods worth Rs. Increasing Tariff for PET will affect the processing and consumer segment and thus tariff for PET should be retained to 5% to nurture consumer products consumption.75 Lakhs crore annually.

Industry demanded that both BIS and international standards should be considered at par. Industry demanded that to prevent under invoicing by foreign players, floor pricing should be established on finished goods.The APIMA had organized an emergency meeting held in Mumbai on December 9, 2019 in the wake of emergency measures that needs to be taken by the central government for revival of the Plastics Industry.The domestic industry is suffering due to dumping by China and other countries at very cheap غير مجاز مي باشدt. Major Plastics Association present were Gujarat State Plastic Manufacturers&PETG Film Sleevemaker-GH50 Factory39; Association, Organization of Plastics Processors of India Maharashtra Plastic Manufacturers Association, Karnataka State Plastics Association,South Gujarat Plastic ManufacturerAssociation, Saurashtra Plastic Manufacturers' Association, Pimpri Chinchwad Plastic Association, Telangana and Andhra Plastics Manufacturers Association, Indian Plastics Federation, Plastics Export Promotion Council,Mr.

Industry is also deeply distressed as most of the insurance companies are declining to provide insurance coverage to MSME’s in plastics processing industry.Existing FTAs with various countries have failed. Elaborating on the demands, Mr Killawala said that taking into account the short term as well as long term growth of plastics processing industry, the industry associations unanimously demanded government to not come under pressure from any quarter to increase custom duty on key raw material. He also expected that the Central Government should engage strongly with the industry to ideate and implement impactful policy solutions for higher growth. However, it is under severe strain due to cheap imports from China and other south Asian countries. 3. However, exports from India to these countries have marginally grown leading to huge trade imbalance.5% as nearly 50% of demand in India is being met through imports due to lack of domestic capacity. The industry body has demanded restructuring of Custom Duties, Anti Dumping Duty on import of cheap finished products, review of Foreign Trade Agreements, enforcement of mandatory BIS standards and technology up gradation fund for the industry among others. Industry felt that this move would put small enterprises to disadvantage and allowing imports of semi-finished and finished products, which are made from very raw materials which are being denied entry by imposing non-tariff barrier to trade (NTBT), would not be in the best interest of the nation.Mumbai: The All India Plastics Manufacturers Association (AIPMA), the 74-year-old and the largest Industry Association in India representing 22,000 industrial units has called for immediate steps by the Government of India to revive the industry and put it back on the growth trajectory.

This would avoid unnecessary compliance burden on the raw material suppliers and at the same time ensure import of safe and quality material,” said Mr Mehta. Industry demanded that the Delta of minimum 10% should be maintained between custom duty of raw material and plastics finished # goods.The plastics processing industry comprises of over 50,000 Micro and small units employing around 50 lakhs people. “The industry is currently witnessing depression in the market which has led the industry to halt their expansion and investment plans,” said Mr. end-of Tags: all india plastics manufacturers association, aipma, plastics, manufacturing, industry Location: India, Maharashtra, Mumbai (Bombay).

“The industry demanded that custom duty of PVC should be brought down from 10% to 7.“Government of India is planning to enforce mandatory BIS standards on raw material. Therefore, Industry demanded that all existing FTA’s be reviewed and Polymers and Products made of Polymers shall be excluded from all FTAs. Arvind Mehta, Chairman, Governing Council, AIPMA.The plastics industry has also demanded that the long pending proposal for Technology Up gradation Fund on the lines of Textile industry should be implemented immediately to spur the export growth.5%.Industry raised serious concerns with respect to insurance companies exponentially increasing premium for providing insurance coverage against fire and safety.On the other hand, Small units would face major disruption if BIS standards are made mandatory on plastic finished goods due to compliance burden, high غير مجاز مي باشدt of certifications and renewal, non-availability of adequate facilities for testing and harassment by authorities. Any increase in custom duty will affect the agriculture sector due to high use of PVC pipes and fittings. He further highlighted the need for Government to come out with clear plans and strategy on various fronts in order to spur the much needed growth


ادامه مطلب
امتیاز:
 
بازدید:
[ ۲۸ اسفند ۱۳۹۹ ] [ ۰۳:۴۰:۲۳ ] [ mposgenei ]

Residents of Taraboda village demanded a probe into the alleged sale of plastic rice as their children fell ill after consuming rice that appeared “completely plain and polished.”After receiving the complaint, Komna block civil supplies officer said that they would examine the samples.” “The plastic rice allegation is a rumour.”Mr Gutu said that he felt a “different taste” while consuming thea rice on Wednesday. After cooking, the grains looked separated from each other. He said he had purchased 5kg rice (Arua Chaula) of the Balami variant at Rs 250 in the first week of June. We are ready to examine the rice if the samples will be sent to us,” said the V-C.The “plastic rice” was found by Dillip Narayan Gutu, a resident of Sheikh Bazaar in Cuttack, who told his neighbours about it.

He found the rice to be “very long, white and plain like Biryani rice. Suspecting it to be plastic, he threw the rice at the wall making a ball of it, but the ball didn’t break. The district administration ordered a probe into it in the city on Friday.“The PETG Film SLEEVEMAKER-GM45 Factory rice does not smell rotten,” said Dilip’s mother. On getting the information, Cuttack collector Nirmal Chandra Mishra directed district supply officer Amar Mohapatra for a probe into the matter. Odisha University of Agriculture and Technology (OUAT) vice chancellor professor Surendranath Pasupalak said the plastic-rice reports were a “rumour. Recently, plastic rice samples were found in Nuapada district in Odisha.Bhubaneswar: Alleged sale of plastic rice in Cuttack, Odisha triggered panic among locals. Also, the rice was still fresh a day after on Thursday.The incident came on the heels of plastic rice sales being reported from different parts of the country


ادامه مطلب
امتیاز:
 
بازدید:
[ ۲۲ اسفند ۱۳۹۹ ] [ ۱۱:۲۳:۱۷ ] [ mposgenei ]

Although each recycle process requires a small amount of new plastic, we can greatly increase the life cycle of the material by efficiently reusing what we make.However, beyond urgently required global decarbonisation, we need to reduce our seemingly insatiable demand for carbon-based plastic.The first artificial plastic, Bakelite, was developed in 1907, but it wasn’t until the 1950s that the age of plastic began.As plastics take centuries to degrade, disposal in landfill makes only a small PETG Film Sleevemaker-GH45 Suppliers contribution to emissions in theory. The materials themselves are carbon neutral, although renewable power is essential to eliminate the climate impact of energy غير مجاز مي باشدts during production, transport and waste processing.

If it were a country, the ‘Plastic Kingdom’ would be the fifth-highest emitter in the world.Making plastic climate-friendlyIf we are to combat climate breakdown, reductions in plastic emissions are clearly needed. If we show a genuine appetite to address plastic pollution, the world could change again just as quickly. The highest-quality plastics can be recycled many times and nearly all plastic can be recycled to some extent but only 18 per cent was actually recycled worldwide in 2015. Newly published research calculates that across their lifecycle, plastics account for 3. With the population set to rise dramatically, increasingly coveted arable space may not be able to satisfy demand. That’s almost double the emissions of the aviation sector.We’re all too aware of the consequences of plastics in the oceans and on land. These raw materials are refined to form ethylene, propylene, butene and other basic plastic building blocks, before being transported to manufacturers. end-of Tags: plastic, plastic pollution, recycling, global warming, carbon footprint. However, beyond the visible pollution of our once pristine habitats, plastics are having a grave impact on the climate too. The remainder occurs as a result of chemical and manufacturing processes – for example, the production of plastic foams uses HFCs, particularly potent greenhouse gases.The bottom line, therefore, is that we will need to reduce our demand for plastic.A further 30 per cent is emitted at the product manufacturing stage.

According to the study, simply reducing the annual growth in plastics demand from 4 per cent to 2 per cent could result in 60 per cent lower emissions from the sector in 2050. While a life without plastics may seem unimaginable, it is worth remembering that their prevalence is a relativity recent phenomenon. Increasing recycling rates is one simple way of doing this. According to the study, about 61 per cent of total plastic greenhouse gas emissions comes from the resin production and transport stage.8 per cent of global greenhouse gas emissions. Thankfully, the solution with the biggest potential is already in motion, albeit slow. However, as much as 40 per cent of landfill waste is burnt in open skies, dramatically speeding up the release of otherwise locked-up carbon. In showing that transitioning to a zero carbon energy system has the potential to reduce emissions from plastic by 51 per cent, the study provides yet another reason to rapidly phase out fossil fuels.

At 380m tonnes a year, we produce 190 times more plastic than we did in 1950. If the demand for plastic continues to grow at its current rate of 4 per cent a year, emissions from plastic production will reach 15 per cent of global emissions by 2050. A more fundamental solution is to switch to making plastics from biodegradable sources such as wood, corn starch and sugar cane. Demand is set to rise, too.The remaining carbon footprint occurs when plastics are thrown away.The production and transport of these resins requires an awful lot of energy and therefore fuel. The vast majority of these emissions come from the energy required to power the plants that turn raw plastic materials into the bottles, bin bags and bicycle helmets we use today.Carbon footprint of the plastic lifecycleMore than 99 per cent of plastics are manufactured from petrochemicals, most commonly from petroleum and natural gas. Greenhouse gas emissions also occur during the refining process itself – the “cracking” of larger hydrocarbons from petrochemicals into smaller ones suitable for making plastic releases carbon dioxide and methane.*The article was originally published by The Conversation Global Perspectives. Incineration releases all of the stored carbon in the plastic into the atmosphere, as well as air pollutants such as dioxins, furans, mercury and polychlorinated biphenyls, which are toxic and damaging to human health. Governments, corporations, and individuals must make research into alternatives a priority and support alternatives to needless plastic waste.However, a massive ramping up in the production of bioplastics, which currently make up less than 1 per cent of the total plastic production, would require vast swathes of agricultural land


ادامه مطلب
امتیاز:
 
بازدید:
[ ۲۱ اسفند ۱۳۹۹ ] [ ۰۵:۰۳:۴۰ ] [ mposgenei ]

The lawyer is now set on persuading restaurants to go for plastic-free food services. There are several other nullahs that empty plastic waste into the sea; the waste accumulates for years being non-biodegradable,” he added.In 2017, the team has cleaned 64 public toilets in 62 weeks and planted 530 trees. Second is to go and clean up the outside like the beach clean-up to prevent litter.2 million kg of plastic during a year-long drive spearheaded by Afroz Shah, a Mumbai-based environment lawyer.

Twenty-five volunteers came over for dinner. One look at his Twitter account reveals the basic habits that can be inculcated to reduce unnecessary use of plastic. Food was ordered, picked up and gobbled.”A huge portion of garbage also ends up in the sea through the citynullahs and rivers, which have now become a dumping spot for citizens.“The first nullah that opens into the sea is in Siddharth Nagar, Goregaon.The drive, conducted through 2017, included 116 clean-up exercises involving 50,000 volunteers, including children. Four is to encourage others to adopt this lifestyle.“Last night was a crowded dinner affair at my place. One is to monetise plastic.

Amid the growing menace of plastic, the lawyer asserted the need to monetise plastic and make ‘zero garbage’ houses. We go there every week for two hours to educate people about handling plastic properly. A simple tweak in our heads and we jump on to the bandwagon of doing our bit for nature,” read his Facebook post. Third is to make your houses ‘zero garbage’.All this — without using wholesale Heat Shrink SLEEVE film any plastic packaging.Mr Shah said, “There are four basic things that can be adopted for a plastic-free life.Mumbai: Versova beach has been cleared of a jaw-dropping 6


ادامه مطلب
امتیاز:
 
بازدید:
[ ۵ اسفند ۱۳۹۹ ] [ ۱۰:۰۱:۵۱ ] [ mposgenei ]

The aim behind holding the exhibition is to ensure that alternative products are available in adequate numbers when the ban becomes operational from June 23,” said a senior civic official. Majority of them are women’s self help groups, said civic officials. “Cloth, paper or jute bags should also be made available as an alternative to plastic bags,” said civic activist Nikhil Desai.The BMC has asked these organisations to register with the civic body for taking part in the exhibition.More than 150 organisations have showed their interest about participating in the exhibition.China easy peel lidding film Company “To implement plastic ban, we are in search of products, which would provide alternatives to plastic. The products may be in the form of cloth, paper, wood and other natural derivatives.

For the implementation of plastic ban, the BrihanmumbaiMunicipal Corporation (BMC) has sought help from several private organisations for providing an effective alternative to banned plastic activists have said that BMC should provide alternatives to plastic bags for the effective implementation of ban. In addition to this, companies, which recycle plastic items, have also contacted the BMC for the exhibition, they said. It has provided a phone number , as well as an email id acplanning. It has invited these organisations to participate in the exhibition.The civic body has called upon non-government organisations, women’s self help groups, traders and companies to participate in its drive against plastic.According to civic officials, the BMC has organised a mega three-day exhibition and sale in the second week of May for the promotion of non-plastic items


ادامه مطلب
امتیاز:
 
بازدید:
[ ۱۸ بهمن ۱۳۹۹ ] [ ۰۸:۲۲:۲۹ ] [ mposgenei ]

Trump makes several uncomfortable attempts to hold the First Lady’s hand and the awkward moment slides as they continue towards the aircraft. Melania’s long yellow overcoat is deceivingly draped over her shoulders leading the President to mistakenly grab her sleeves instead of her hand.Needless to say the video has gone viral taking the internet by a rib-tickling storm. Wearing the coat over her shoulders is a sure sign. WooHoo Melania 1 trump 0— Karen Sather (@swirlgal01) February 5, 2018Awesome.— Pam Hilland The video shared by NBC News shows the two walking towards the aircraft.

She’s stuck and I’m thrilled— Just Me (@AnaXwingAna) February 5, 2018I figured it out! She won’t use sleeves because she doesn’t want him to reach for her hand— American Gaudy™ (@SolemnAutumn) February 5, 2018Apparently @flotus does everything in her power to avoid body contact.Ha! Ha! But for about 5 seconds he had her hand! Then she blocks his move and she gains control again. wholesale high barrier films She made her bed years ago as his mistress, now she’s clearly nauseated just being near him.In a video that is reminiscent of May 2017, US President Donald Trump fumbles awkwardly as he tries to hold First Lady Melania Trump’s hand and fails, yet again.Trump and Melania were proceeding to board Marine One as they were set to travel to Ohio from the White House.

The internet naturally wasn’t quiet:“If I don’t put arm in sleeve he can’t grab hand”— Dead Pool (@MrPoolToYou) February 5, 2018Why the hell doesn't this women put her arms in the coat sleeves?— PamS (@PamSchep) February 5, 2018She needs to spring into a ninja stance in case the orange one attacks her— Jim
ادامه مطلب

امتیاز:
 
بازدید:
[ ۳۰ دى ۱۳۹۹ ] [ ۰۵:۱۵:۰۱ ] [ mposgenei ]
[ ۱ ][ ۲ ]
.: Weblog Themes By limoblog :.

درباره وبلاگ

موضوعات وب
موضوعي ثبت نشده است
لینک های تبادلی
فاقد لینک
تبادل لینک اتوماتیک
لینک :
خبرنامه
عضویت   لغو عضویت
امکانات وب